Multi-Stage Optimization of Electronic Product Control and Cost Based on Sampling and Testing
DOI:
https://doi.org/10.54097/4b2et215Keywords:
Sampling and testing, Cost optimization, Defective rate control, Production decision models.Abstract
In the production control of electronic products, more and more people are concerned about the optimization of cost-effectiveness. This paper investigates the quality control and cost optimization problems in the production process of electronic product manufacturing enterprises, and proposes a decision optimization model especially for the complex multi-stage production process. Spare parts quality sampling and testing, finished product testing and the treatment of unqualified finished products.This paper proposes a stratified sampling and inspection module and a two-step sampling and inspection model to optimize the inspection process, reduce the cost, and improve the inspection accuracy and reliability. And it is able to analyze the total cost and the number of cycles in conjunction with optimizing the decision-making after each stage of production to arrive at the cost-optimal solution. For multi-process and multi-part production scenarios, the optimization model has achieved significant results in defective rate control and production efficiency improvement. Through model solving and data analysis, optimization strategies are proposed to achieve the quality control objectives and cost minimization of the enterprise.
Downloads
References
[1] Muhammad Waqas, Song Hua Xu, Sajid Hussain, Muhammad Usman Aslam, Control charts in healthcare quality monitoring: a systematic review and bibliometric analysis, International Journal for Quality in Health Care, Volume 36, Issue 3, 2024, mzae060, https://doi.org/10.1093/intqhc/mzae060
[2] Mukhopadhyay, Arup Ranjan. "A Multi-objective Economic Statistical Design of the CUSUM chart: NSGA II Approach." arXiv preprint arXiv:2409.04673 (2024).
[3] Khalil, Umair, et al. "A robust cusum control chart for median absolute deviation based on trimming and winsorization." Plos one 19.5 (2024): e0297544.
[4] Kang, C.W., Ramzan, M.B., Sarkar, B. et al. Effect of inspection performance in smart manufacturing system based on human quality control system. Int J Adv Manuf Technol 94, 4351–4364 (2018). https://doi.org/10.1007/s00170-017-1069-4
[5] Yang, J.; Li, S.; Wang, Z.; Dong, H.; Wang, J.; Tang, S. Using Deep Learning to Detect Defects in Manufacturing: A Comprehensive Survey and Current Challenges. Materials 2020, 13, 5755. https://doi.org/10.3390/ma13245755
[6] Sundaram, S.; Zeid, A. Artificial Intelligence-Based Smart Quality Inspection for Manufacturing. Micromachines 2023, 14, 570. https://doi.org/10.3390/mi14030570
[7] Zhang, K. et al. (2024). Dynamic Multi-objective Opti-State Decision-Making Method for Intermittent Synchronized Production Operation System. In: Thürer, M., Riedel, R., von Cieminski, G., Romero, D. (eds) Advances in Production Management Systems. Production Management Systems for Volatile, Uncertain, Complex, and Ambiguous Environments. APMS 2024. IFIP Advances in Information and Communication Technology, vol 732. Springer, Cham. https://doi.org/10.1007/978-3-031-71637-9_31
[8] Torbali, Bilge and Gülgün Alpan. “A Multi-Agent-Based Real-Time Truck Scheduling Model for Cross-Docking Problems with Single Inbound and Outbound Doors.” Supply Chain Analytics (2023): n. pag.
[9] X. Li, H. Tang, Z. Yang, R. Wu and Y. Luo, "Integrated Optimization Approach of Hybrid Flow-Shop Scheduling Based on Process Set," in IEEE Access, vol. 8, pp. 223782-223796, 2020, doi: 10.1109/ACCESS.2020.3044606.
[10] Wu, J.; Zhang, D.; Yang, Y.; Wang, G.; Su, L. Multi-Stage Multi-Product Production and Inventory Planning for Cold Rolling under Random Yield. Mathematics 2022, 10, 597. https://doi.org/10.3390/math10040597
[11] Aleksandar Kovačević, Jelena Slivka, Dragan Vidaković, Katarina-Glorija Grujić, Nikola Luburić, Simona Prokić, Goran Sladić, Automatic detection of Long Method and God Class code smells through neural source code embeddings,Expert Systems with Applications,Volume 204,2022,117607,ISSN 0957-4174,https://doi.org/10.1016/j.eswa.2022.117607.
[12] A. Polenghi, L. Cattaneo, M. Macchi, D. Pasanisi, V. Pesenti, A. Borgonovo,Development of an advanced condition-based maintenance system for high-critical industrial fans in a foundry, IFAC-PapersOnLine, Volume 55, Issue 2,2022,Pages 48-53,ISSN 2405-8963
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Highlights in Business, Economics and Management
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
