Analysis of Grasping Target by Simulated Six-Axis Robot

Authors

  • Guanxiang Jing

DOI:

https://doi.org/10.54097/hset.v63i.10884

Keywords:

Six axis robots, DH method, inverse solution.

Abstract

A six-axis robot is a type of robotic manipulator with six degrees of freedom (DOF) that enable it to move and rotate in six different directions. Because of its flexibility and high-precision operation, it is widely used in industrial production lines, semiconductor manufacturing, medical surgery and other fields. In the future, with the development of artificial intelligence, sensor technology and other fields, six-axis robots will achieve more intelligent and autonomous operation, and will also be more widely used in industry, medical treatment, service and other fields. In this paper, the important applications of six-axis robots in industry and other fields are introduced by introducing the relevant applications of artificial intelligence and robots. Then the DH representation method and inverse solution method are introduced, and a six-axis robot is modeled and the relevant data are calculated in MATLAB software using the DH representation method and inverse solution method. Finally, the trajectory of the robot gripper was simulated and the simulation results were obtained, which preliminarily verified the feasibility and reliability of the six-axis robot grasping objects.

Downloads

Download data is not yet available.

References

Wang, Z, Sheu, J, Teo, et al, G 2022, ‘Robot Scheduling for Mobile‐Rack Warehouses: Human–Robot Coordinated Order Picking Systems’, Production and operations management, vol. 31, no. 1, pp. 98–116.

Lam, C-P, Chou, C-T, Chiang, et al, L-C 2011, ‘Human-Centered Robot Navigation-Towards a Harmoniously Human-Robot Coexisting Environment’, IEEE transactions on robotics, vol. 27, no. 1, pp. 99–112.

Sarchi, L, Mottaran, A, et al, 2022, ‘Robot‐assisted radical prostatectomy feasibility and setting with the HugoTM robot‐assisted surgery system’, BJU international, vol. 130, no. 5, pp. 671–675.

Barbash, GI & Glied, SA 2010, ‘New Technology and Health Care Costs — The Case of Robot-Assisted Surgery’, The New England journal of medicine, vol. 363, no. 8, pp. 701–704.

Bingol, MC & Aydogmus, O 2020, ‘Performing predefined tasks using the human–robot interaction on speech recognition for an industrial robot’, Engineering applications of artificial intelligence, vol. 95, p. 103903.

Alam Md Moktadir, et al, 2021, ‘Kinematic Modeling of Six-Axis Industrial Robot and its Parameter Identification: A Tutorial’, International journal of automation technology, vol. 15, no. 5, pp. 599–610.

Lu, Y & Wang, K 2021, ‘Kinematics Analysis and Trajectory Planning of Polishing Six-axis Robot’, IOP conference series. Earth and environmental science, vol. 632, no. 5.

Wang, P, et al, N 2022, ‘An Inverse Solution Algorithm for Industrial Robot’, Journal of physics. Conference series, vol. 2173, no. 1, p. 012085.

Zhang, T, Song, et al, Q 2021, ‘A novel method to identify DH parameters of the rigid serial-link robot based on a geometry model’, Industrial robot, vol. 48, no. 1, pp. 157–167.

Kawasaki Robotics. https://kawasakirobotics.cn/products-robots/rs005n/.

Hua Dai, Chengyong Yao, 2003, ‘Conditions for the existence of solutions to the inverse eigenvalue problem of Jacobian matrices’ [J] Journal of Computational Mathematics of Colleges and Universities, vol. 25, pp. 40-49.

Downloads

Published

08-08-2023