Analysis of the Principle and State-of-art Performances of Perovskite Solar Battery

Shijia Lin

doi:10.54097/2ed0xf59

Authors

Shijia Lin

DOI:

https://doi.org/10.54097/2ed0xf59

Keywords:

Perovskite solar battery, quasi-two-dimensional, photovoltaic parameters.

Abstract

As a matter of fact, the perovskite has been widely implemented in solar material due to the high convergence efficiency. With this in mind, this paper will analyze the principle as well as the state-of-art performances for the solar battery based on perovskite. To be specific, the brief history of the development of calcite solar cells was given. The basic perovskite crystal structure is shown simultaneously. Two structural types of the Perovskite solar battery: mesoscopic structure and planer heterojunction are introduced. Focus on the performance of the quasi-2D Perovskite Solar Battery. First, this study will show its structure and then show Characterization Methods and Features. The photovoltaic characteristics of Perovskite Solar Cells with various device architectures and various organic amine cations is given. According to the analysis, the applications of Perovskite Solar Battery with Greenhouses Technology as main object is shown. Overall, these results shed light on guiding further exploration of solar material.

Downloads

Download data is not yet available.

References

Lee M M, Teuscher J, Miyasaka T, et al. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites. Science, 2012, 338(6107): 643-647.

Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. Journal of the American Chemical Society, 2009, 131(17): 6050-6051.

NREL efficiency chart. 2020 Retrieved from: https://www.nrel.gov/pv/cell-efficiency.html.

Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 2009, 131: 6050–6051

Kim HS, Lee CR, Im JH, et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci Rep, 2012, 2: 591

Liu Z, Sun Y, Yuan J, et al. High‐efficiency hybrid solar cells based on polymer/PbSxSe1‐x nanocrystals benefiting from vertical phase segregation. Advanced Materials, 2013, 25(40): 5772-5778.

Stoumpos C C, Malliakas C D, Kanatzidis M G. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties [J]. Inorg Chem, 2013, 52(15): 9019-9038

Ogomi Y, Morita A, Tsukamoto S, et al. CH_3 NH_3 Sn_x Pb_((1-x)) I_3 perovskite solar cells covering up to 1060nm. J Phys Chem Lett, 2014, 5(6): 1004-1011

Kitazawa N, Watanabe Y, Nakamura Y. Optical properties of CH_3 NH_3 PbX_3 (X = halogen) and their mixed-halide crystals. Journal of Materials Science, 2002(17):37.

Noh J H, Im S H, Heo J H, et al. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells. Nano Letters, 2013, 13(4): 1764-1769.

Shi D, Adinolfi V, Comin R, et al. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science, 2015, 347(6221): 519-522

Kim H S, Lee C R, Im J H, et al. Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%. Scientific Reports, 2012, 2: 591.

Bi D, Boschloo G, Schwarzmüller S, et al. Efficient and stable CH_3 NH_3 PbI_3-sensitized ZnO nanorod array solid-state solar cells. Nanoscale, 2013, 5(23): 11686-11691.

Liu M, Johnston M B, Snaith H J. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature, 2013, 501(7467):395-398.

Malinkiewicz O, Yella A, Lee Y H, et al. Perovskite solar cells employing organic charge-transport layers. Nature photonics, 2014, 8(2): 128-132.

Fu Y, Zheng W, Wang X, et al. Multicolor Heterostructures of Two-Dimensional Layered Halide Perovskites that Show Interlayer Energy Transfer. Journal of the American Chemical Society, 2018, 140(46):15675-15683.

Dong A, Jing W, Liu X, et al. Layered hybrid perovskite solar cells based on single-crystalline precursor solutions with superior reproducibility. Sustainable Energy & Fuels, 2018, 2: 1039.

Chen Y. Efficient and Stable Ruddlesden-Popper Perovskite Solar Cell with Tailored Interlayer Molecular Interaction. Chinese Luminosity, 2020, 34(7): 2.

Song J, Bian J, Zheng E, et al. Efficient and Environmentally Stable Perovskite Solar Cells Based on ZnO Electron Collection Layer. Chemistry Letters, 2015, 44(5): 610-612.

Xu L, Chen X, Jin J, et al. Inverted perovskite solar cells employing doped NiO hole transport layers: A review. Nano Energy, 2019, 63: 103860.

Subhani W S, Wang K, Du M, et al. Anti-solvent engineering for efficient semitransparent CH3NH3PbBr3 perovskite solar cells for greenhouse applications. Journal of Energy Chemistry, 2019, 34: 12-19.

Wang Z, Zhu X, Feng J, et al. Semitransparent flexible perovskite solar cells for potential greenhouse applications. Solar RRL, 2021, 5(8): 2100264.