Design of auxiliary viewing mirror for filter centering drum in GD121-AF12 filter assembler

Chengjian He; Xiaobo Lv; Hao Zhang; Xingjian Zhu; Shuangjun Zhang

doi:10.54097/swmabn25

Authors

Chengjian He
Xiaobo Lv
Hao Zhang
Xingjian Zhu
Shuangjun Zhang

DOI:

https://doi.org/10.54097/swmabn25

Keywords:

GD121-AF12 filter assembler; Law of light reflection; Filter centering drum; Auxiliary observation mirror; efficiency.

Abstract

In order to solve the problem of observation blind area on the outer end face of the cigarette groove of the filter centering drum on the GD121—AF12 filter assembler, an auxiliary observation mirror was designed and installed on the inner wall nearby. According to the light reflection law, according to the space position the central position of the mirror , design the mirror surface support parts refer to the available screw holes on the mirror surface center and inner wall, and calculate the relative position and deflection angle of the support parts. Based on the above data, support parts are designed with Pro/E, and parts are made with 3D printer. After the improved equipment is blocked, the manual cleaning time is reduced to 3.2min/time, and the maintenance time is reduced by 67%, which effectively reduces the labor intensity of operators and improves the equipment efficiency.

Downloads

Download data is not yet available.

References

Kuitian ZHOU, “Comparison and Research on working principle of PROTOS2-2 and GD121PLUS/16K super high speed cigarette Feeder “// Proceedings of 2010 Academic Annual Meeting of China Tobacco Society, Chinese Tobacco Society, pp.345-350, 2010.

DeJun LI, Xiaotun CHEN, Hengle PAN,” Modification of cigarette weight control system in GD121A cigarette maker”. Tobacco Science & Technology, vol.A5, pp.95-99, 2021.

Jianjian TAO,” Application of Screw Conveyor in GD121A Cigarette Machine”. Internal Combustion Engine & Accessories, vol.A21, pp.237-238.2019.

Hengle PAN, Xiongwei FENG, Jun WANG,” Development of automatic cleaning Device for rolling joint of ZJ116A Cigarette Machine “. Food & Machinery, vol.A6, pp.122-124, 132, 2020.

Dongzi JIANG, Dongliang SUN, Jianrong YANG, et al. “Improvement of Cutting Mechanism of final slitting drum wheel for YJ212 Plug Assembler”. Tobacco Science and Technology, vol.A9, pp.24-25, 2011.

Dongzi JIANG, Jinchen WANG, Hongguo CHU, et al,”Research and design of washboard automatic cleaning device for YJ212 Plug Assembler”. Automation and Instrumentation in Chemical Industry, vol.A4, pp.383-387, 412, 2017.

Dongzi JIANG, Jinchen WANG, Hongguo CHU, et al.” Design of Automatic Cleaning Device for SE Cigarette Strip Conveying Channel of ZJ112 Cigarette Machine “. Tobacco Science and Technology, vol.A2, pp.82-86, 2018.

Ming YANG, Daoping GONG,” Improvement of dust Suction Device for ZJ112 cigarettem maker garniture “. Journal of Hunan University of Arts and Science (Natural Science Edition), vol.A1, pp.43-45, 2018.

Pengfei TANG, Hengle PAN, Jun WANG,” Development of Tool Roller Brush Lubrication Device for ZJ118 Cigarette Machine”,Computer Knowledge and Technology,volA12,pp.242-244,2020.

Feng QIAN, Bo ZHOU, Meng SHU, et al,”Design and motion simulation of cigarette strip automatic cleaning device based on Adams “,Acta Tabacaria Sinica, vol.A3,pp.26-34,2022.