Research and Development Status of Solid-State Batteries

Authors

  • Yawen Shen

DOI:

https://doi.org/10.54097/m59d2s84

Keywords:

Solid-State battery, solid-state electrolyte, sulfide electrolyte, oxide electrolyte, polymers electrolyte.

Abstract

Batteries, as a widely used energy storage device, have become an important component in the development of modern society. However, traditional liquid batteries face a number of security challenges, energy density and lifespan, and the development of new battery technologies is urgently needed. As an emerging battery technology with high energy density, safety advantages and long lifespan, solid-state batteries (SSB) have obtained much attention worldwide. This paper first introduces the basic working principle of batteries. Batteries use chemical reactions to convert chemical energy into electrical energy, and realize the energy output by the flow of electrons through the movement of ions in the electrolyte. SSB differ from conventional liquid batteries in that they use solid-state materials, such as ceramics or polymers, for the electrolyte, which provide high ionic conductivity. Second, this paper will examine the current SSB development, in which domestic and foreign research institutions and enterprises have conducted extensive and continued to research SSB. They are committed to improving the battery preparation process, optimizing the battery assembly structure, and developing new solid-state electrolyte (SSE) materials. This paper then explores the fundamental technologies related to SSE, which are a critical aspect in the advancement of SSB. Recently, scientists have suggested a range of solid-state electrolyte materials possessing elevated levels of ionic conductivity, including oxides, sulfides, and polymers. Lastly, the advantages and challenges of SSB are analyzed in this paper. Greater safety, higher energy density, and longer lifespan are offered by SSB in comparison to traditional liquid batteries. Nonetheless, challenges regarding the conductivity of the solid-state electrolyte, selection of electrode material, and battery manufacturing costs still need to be addressed by SSB. In summary, SSB as an innovative energy storage solution have great development potential and broad application prospects. Future research and technological innovation will further promote the application and commercialization of SSB in energy storage.

Downloads

Download data is not yet available.

References

Li Y., Zhang D.C., Xu X.J., Wang Z.S., Liu Z.B., Shen J.D., Liu J., Zhu M., Interface engineering for composite cathodes in sulfide-based all-solid-state lithium batteries. J. Journal of Energy Chemistry. 2021, 60: 32 - 60.

Chen L., Huang S.B., Qiu J.Y., Zhang H., Cao G.P., Polymer Electrolyte/Anode Interface in Solid-State Lithium Battery. J. Progress in Chemistry, 2021, 33 (8): 1378 - 1389.

Wang H.C., Sheng L., Yasin G., Wang L., Xu H., He X.M., Reviewing the current status and development of polymer electrolytes for solid-state lithium batteries. J. Energy Storage Materials. 2020, 33: 188 - 215.

Zhao Y., Wang L., Zhou Y.N., et al., Solid polymer electrolytes with high conductivity and transference number of Li Ions for Li-based rechargeable batteries. J. Advanced science, 2021, 8 (7): 2003675.

Kudu U., Famprikis T., Fleutot B., et al., A review of structural properties and synthesis methods of solid electrolyte materials in the Li2S-P2S5 binary system. J. Journal of Power Sources. 2018, 407: 31 - 43.

Kato Y., Hori S., Saito T., Suzuki K., Hirayama M., Mitsui A., Yonemura M., Iba H., Kanno R., High-power all-solid-state batteries using sulfide superionic conductors. J. Nature Energy 2016, 1 (4): 16030.

Zeng C.L., Wu J.F., Xiang Y., Zi L.W., Nancy J.D., Jim K, Kun L.H., Adam J.R., and Cheng D.L.J., Journal of the American Chemical Society, 2013, 135 (3), 975 - 978.

He L.C., et al., Synthesis and interface modification of oxide solid-state electrolyte-based all-solid-state lithium-ion batteries: Advances and perspectives. J. Functional Materials Letters, 2021, 14 (03): 2130002.

Yu K., Gu R., Wu L., Sun H., Ma R., Jin L., Xu Y., Xu Z., Wei X., Ionic and electronic conductivity of solid electrolyte Li0.5La0.5TiO3 doped with LiO2-SiO2-B2O3 glass. J. Journal of Alloys and Compounds, 2018, 739: 892 - 896.

Xie H., Goodenough J.B., Li Y., Li1.2Zr1.9Ca0.1(PO4)3, a room-temperature Li-ion solid electrolyte. J. Journal of Power Sources, 2011, 196 (18): 7760 - 7762.

Deng K., Zeng Q., Wang D, et al., Single-ion conducting gel polymer electrolytes: design, preparation and application. J. Journal of Materials Chemistry A, 2020, 8 (4): 1557 - 1577.

Downloads

Published

27-02-2024

How to Cite

Shen, Y. (2024). Research and Development Status of Solid-State Batteries. Highlights in Science, Engineering and Technology, 83, 145-152. https://doi.org/10.54097/m59d2s84