Research on the Safety of Intelligent Vibration Control System for Electric Vehicle Suspension

Mingjie Li

doi:10.54097/hset.v9i.1784

Authors

Mingjie Li

DOI:

https://doi.org/10.54097/hset.v9i.1784

Keywords:

Active suspension; active vibration reduction; electric vehicle; vibration reduction control system.

Abstract

Aiming at the problem of poor vertical vibration performance of electric vehicles, an integrated design scheme of electric vehicle suspension based on in-wheel vibration damping system is proposed, and the fuzziness between vehicle suspension and in-wheel vibration damping system is carried out for this scheme. control. Then, the LQR control method based on particle swarm optimization weight coefficient is adopted, and the LQR optimization controller is designed to comprehensively control the electric in-wheel vibration damping system and the vehicle suspension, and further optimize the vehicle ride comfort and electric wheel vibration performance. The simulation results show that the inversion control strategy based on the reference model can effectively suppress the vertical motion of the body, reduce the vertical acceleration of the body, and at the same time reduce the tire deformation to a certain extent, and improve the ride comfort and driving stability of the car.

Downloads

Download data is not yet available.

References

Feng Fan. Modelling and Simulation Analysis of Automobile Damping System Based on Finite Element Method. Electronic Design Engineering, 29(6) (2021) 41-47.

Mu Zengguo, Zhang Jiping, Li Hongming. The effect of prestress on the natural frequency of automobile shock absorbers. Machinery Manufacturing and Automation, 50(1) (2021) 14-19.

Xie Yawen. Semi-active suspension system based on damping multi-stage segment adjustment. Computer Measurement and Control, 28(2) (2020) 55-62.

Zhang Xiaojuan. Research on Control Strategy of Automobile Semi-active Suspension——Comment on "New Technology of Automobile Suspension System". Mechanical Design, 8(9) (2020) 14-19.

Wei Ya, Kang Fan. Application form and progress of carbon fiber composite materials in new energy vehicles. Bonding, 42(4) (2020) 55-61.

Nie Xiaoyong, Yang Hai, Li Shenguo, et al. Application of Vacuum Die Casting Aluminum Alloy Shock Tower on Aluminum Body. Special Casting and Nonferrous Alloys, 40(3) (2020) 57-68.

Wu Wenwang, Xiao Dengbao, Meng Jiaxu, et al. Mechanical design of structures with negative Poisson’s ratio, impact resistance and its application and prospect in vehicle engineering. Chinese Journal of Mechanics, 53(3) (2021) 28-33.

Gong Xiaofeng, Yu Renping, Xing Qin. Design of complex multi-station continuous die for automotive interior reinforcements. Forging Technology, 45(12) (2020) 65-72.

None. AIWAYS' U5 with steel-aluminum hybrid body was launched in December 2019. Special Casting and Nonferrous Alloys, 40(1) (2020) 11-17.

He Yuyang. Application of Phononic Crystal Structure Panels in Noise Control in Vehicles. Noise and Vibration Control, 40(6) (2020) 55-60.