Synthesis Of Nano-Porous Strontium Titanate Materials for Photocatalysis
DOI:
https://doi.org/10.54097/m5a1kf92Keywords:
Strontium titanate; hydrothermal method; nano-porous structure; template method; photocatalysis.Abstract
Strontium titanate semiconductor materials have been widely used in the field of photocatalysis due to their high dielectric constant and band gap. Uniform, micron-sized SrTiO3 particles didn’t tend to aggregate, and the low surface area of larger particles could be improved by incorporating porous structures, thus offering superior performance for a range of applications. In this study, six mainly methods to prepare nano-porous SrTiO3 particles were showed and discussed. The methods include hydrothermal method，sol gel method, chemical co-precipitation method, high temperature solid phase method, hard template method and soft template method. These processes and their advantages and disadvantages were analysised.
Downloads
References
Li Heping. Synthsis and Characterization of Nano SrTiO3-based Materials in Photocatalytic Application [D]. Xidian University, 2012.
Eng H W, Barnes P W, Auer B M, et al. Investigations of the electronic structure of d0 transition metal oxides belonging to the perovskite family[J]. Solid State Chemistry, 2003, 175(1): 94-96.
Kubacka A, Fernandez-Garcfa M, Colon G. Advanced Nanoarchitectures for Solar Photocatalytic Applications[J]. Chem. Rev., 2012, 112: 1555-1614.
Hong C，Zou W，Ran P，et al. Anomalous intense coherent secondary photoemission from a perovskite oxide[J]. Nature, 2023, 617(7961): 493-498.
Wang, GY, Wang, YJ, Song, BJ, et al. Performance of Photocatalytic Decomposition of Water into Hydrogen over Co-SrTiO3[J]. CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2003, 19(9), 987-992.
Feng LL, Zou X, Zhao J, Zhou LJ, Wang DJ, Zhang X, Li GD. Nanoporous Sr-rich strontium titanate: a stable and superior photocatalyst for H2 evolution[J]. Chem Commun (Camb). 2013 Oct 28;49(84):9788-90.
Sbaolsky E M, Jame A R, Kowom S, et a1. Piezoelectric properties of (001) textured Pb (Mg1/3Nb2/3) O3-PbTiO3[J]. Applied Physics Letters, 2001, 78(17) ： 2551-2553．
Avudaithai M, Kutty T R N. Ultrafine powders of SrTiO3 from the hydrothermal preparation and their catalytic in the photolysis of water[J]. Materials Research Bulletin, 1987, 22(5): 641-650.
Kato H, Kudo A. Visible-light-response and photocatalytic activities of TiO2 and SrTiO3 photoeatalysts codoped with antimony and chromium[J]．J Phys Chem B, 2002, 106: 5029-5034.
Sun Yuanyuan. Fabrication of 3D porous SrTiO3 microspheres and their photocatalytic activity for Cr (VI) reduction [D]. Tianjin University, 2016, 5: 1-74.
Huang Bingmei. THE PREPARATION AND CATALYTIC PROPERTIES OF NOVEL PLATINUM AND STRONTIUM TITANATE NANOMATERIALS [D]. Guangxi University, 2021.
Li Shengfei. Study on the Fabrication and Modification of Meso-Macroporous Strontium Titanate Thin Films[D]. Shenyang University of Technology. 2021.
Xiao S H; Wang Renheng and Bao Yin. The preparation and electrical properties of barium strontium titanate /silicon nanoporous pillar array composite thin films[J]. Journal of Functional Materials, 2012, 43(03): 338-341.
Wei X, Xu G, Ren Z, et al., Synthesis and Characterization of Mesoporous SrTiO3 Spheres via a Poly Vinyl Alcohol-Assisted Hydrothermal Route[J]. Journal of the American Ceramic Society, 2007, 91(1): 299-302.
Xu Cunying, Zhang Pengxiang, Hong Pinjie. Hydrothermal Synthesis of Surface Modified SrTiO3 Powders[J]. CHINESE JOURNAL OF CHEMICAL PHYSICS, 2006, 14(3): 293-296.
Kuang Q, Yang S. Template synthesis of single-crystal-like porous SrTiO3 nanocube assemblies and their enhanced photocatalytic hydrogen evolution[J]. ACS Apply Material & Interfaces, 2013, 5(9): 3683-3690.
Dong W J, Li X Y, Yu J, et al. Porous SrTiO3 spheres with enhanced photocatalytic performance[J]. Materials Letters, 2012, 67(1): 131-134.
Zhang Wenkui, Tong Xili, Huang Hui, et al. Preparation of perovskite-type nano-SrTiO3 by sol-gel process[J]. The Chinese Journal of Nonferrous Metals. 2005, 15(04), 643-649.
Zhou Z K, Gu T R, Ma J M. Basis of Collochemistry[M]. Beijing: Beijing University Press. 1987, 321.
Pang Qingyu. Preparation of Porous Barium Strontium Titanate and Its Carbon Loading [D]. Beijing University of Chemical Technology. 2016, 5-6.
Wang Hong, Du Lin, Sun Xin, et al. Effect of PEG4000 Amount on Porous Strontium Titanate Photocatalyst by Sol-gel Method[J]. Journal of Materials Engineering, 2014, 12(12): 39-43.
Xu Mingxia, Zhen Liaoying, Sun Qingchi, et al.Synthesis of Highly Pure and Superfine SrTiO3 Powder by sol-gel method from inorganic salt materialsp[J]. Journal of the Chinese Ceramic Society, 2000, (2): 184-186.
ZHU Qi-an, YANG Li-xin, SHI Rong-kai, et al. Synthesis of Highly Pure and Superfine SrTiO3 Powder by Carbonate Coprecipitation Method[J]. Journal of Hunan Institution of Engineering. 2004, 14(4): 68-71.
FANG Huihui, WANG Kaiyi, XUE Song. Preparation of High-Purity and Superfine SrTiO3 Using Carbonate Coprecipitation Method [J]. Journal of Functional Materials, 2000, 31(4): 408.
LU Hong-xia, JING Hui, ZHANG Ling-ling, et al. Strontium Titanate Powder of Co-precipitation Method Preparation Research[J]. HUNAN NONFERROUS MATELS, 2017, 33(6): 49-51.
ZHANG Hao, CHANG Zhuguo, CUI Bin. Preparation of strontium titanate nanopowder by chemical coprecipitation method with new technique[J]. ELECTRONIC COMPONENTS AND MATERIALS, 2009, 28(6), 13-15.
YANG Shui-bin, ZOU Gui-mei, HUANG Xiao-min, et al. Synthesis study progresses of strontium titanate[J]. Insulating Materials, 2004, 5(19): 58-60.
Usimaki U, Vahakangs J, Leppavuori S. Reaction rates of BaTiO3 and SrTiO3[J]. J Am Ceram Soc, 1982, 65(3): 147-149.
Liu Guya. Solid phase synthesis and characterization of SrTiO3 [J]. Science ＆ Technology Information, 2017, 15(21): 219.
Liu H, Chen X L, Yan S C, et al. Basic molten salt route to prepare porous SrTiO3 nanocrystals for efficient photocatalytic hydrogen production [J]. Eur J Inorg Chem. 2014, 23: 3731-35.
Katagiri K, Miyoshi Y, Inumaru K. Preparation and photocatalytic activity of strontium titanate nanocube-dispersed mesoporous silica [J]. Journal of Colloid and Interface Science, 2013, 407: 282-286.
Dong W, Li X, Yu J, et al. Porous SrTiO3 spheres with enhanced photocatalytic performance[J]. Materials Letters, 2012, 67(1): 131-134.
Kuang Q, Yang S. Template synthesis of single-crystal-like porous SrTiO3 nanocube assemblies and their enhanced photocatalytic hydrogen evolution[J]. ACS Apply Material &Interfaces, 2013, 5(9): 3683-3690.
Jiao Z, Chen T, Yu H, et al. Morphology modulation of SrTiO3/TiO2 heterostructures for enhanced photoelectrochemical performance[J]. Journal of Colloid and Interface Science, 2014, 419: 95-101.
Pan J H, Shen C, Ivanova I, et al. Self-Template Synthesis of Porous Perovskite Titanate Solid and Hollow Submicrospheres for Photocatalytic Oxygen Evolution and Mesoscopic Solar Cells [J]. ACS Applied Materials & Interfaces, 2015, 7(27): 14859-14869.
Zou Xiaoyan. Fabrication and photocatalytic performance of SrTiO3 materials with specific morphologies [D]. Tianjin University, 2018.
Chen Long, Xu Junmin, Li Ruifeng, et al. A SrTiO3 material and its preparation method[P]. Huangshan Univeristy. 2020.
He Yawen. Controllable growth and photocatalytic performance of mesoporous strontium titanate[D]. Southwest Petroleum University, 2017.
Sun Xin. Research of preparation and photocatalytic properties of titanate[D]. Shenyang Ligong University, 2012.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
