Advancement of Liquid Immersion Cooling for Data Centers

Authors

  • Zhihao Jin

DOI:

https://doi.org/10.54097/4fbbk041

Keywords:

Immersion Cooling; Data Center; Thermal management; Energy Efficiency

Abstract

With the increasing processing capabilities of data centers, the demand for advanced cooling has been increased, positioning liquid immersion cooling systems as a focal point due to their effectiveness and environmental benefits. This paper reviews the current state and prospects of liquid immersion cooling technologies for data centers by paper analyzing. The research spans the optimization of cooling technology parameters, material and coolant performance, as well as system level integration and thermal management. The characteristics analysis of liquids and supercritical fluids underscores the significance of coolant selection Innovative cooling network designs have been shown to initiate failures and improve thermal distribution, enhancing data center performance and reliability. Additionally, the interplay between cooling systems and IT systems has been explored for its overall energy efficiency impact. Liquid immersion cooling technology demonstrates vast potential in ensuring safety, enhancing heat exchange efficiency, and meeting the growing needs of future data center development. Nonetheless, a deep understanding of complex fluid dynamics and heat transfer mechanisms remains key to driving technological advantages.

Downloads

Download data is not yet available.

References

Strugala G. Experimental testing and modelling of variable capacity air-to-air heat pumps (Master's thesis, Ecole Polytechnique, Montreal (Canada)). 2020.

Hosseini SM, Ataei M, Khalokakaei R, Mikaeil R, Haghshenas SS. Study of the effect of the cooling and lubricant fluid on the cutting performance of dimension stone through artificial intelligence models. Engineering Science and Technology, an International Journal. 2020; 23(1):71-81.

Pejman R, Maghami E, Najafi AR. How to design a blockage-tolerant cooling network?. Applied Thermal Engineering. 2020; 181:115916.

Monteiro AJ. Optimization of Data Recording During Isolated Limb Perfusion Technique (Master's thesis, Instituto Politecnico do Porto (Portugal)). 2021.

Zheng Y, Chang H, Qiu Y, Duan C, Chen J, Chen H, Shu S. Prediction of liquid hydrogen flow boiling critical heat flux condition under microgravity based on the wall heat flux partition model. International Journal of Hydrogen Energy. 2020; 45(11):7141-50.

Fu Y, Han X, Baker K, Zuo W. Assessments of data centers for provision of frequency regulation. Applied Energy. 2020; 277:115621.

Yuan X, Xu X, Liu J, Pan Y, Kosonen R, Gao Y. Improvement in airflow and temperature distribution with an in-rack UFAD system at a high-density data center. Building and Environment. 2020; 168:106495.

Lu H, Zhang Z. Numerical and experimental investigations on the thermal performance of a data center. Applied Thermal Engineering. 2020; 180:115759.

Khalaj AH, Halgamuge SK. A Review on efficient thermal management of air-and liquid-cooled data centers: From chip to the cooling system. Applied energy. 2017; 205:1165-88.

Mundahl AJ. Characterization of Ionic Liquid Monopropellants for a Multimode Propulsion System. Missouri University of Science and Technology; 2018.

Cao Y, Ding Z, Wang P, Zhang S, Liu J, Liu W, Cheng M. Coordinated Operation for Data Center and Power System in the Context of Energy Internet (II): Opportunities and Challenges. Proc. CSEE. 2022;42:3512-26.

Koskiniemi H. Data center cooling (Master's thesis). 2021.

Yan WM, Teng HY, Li CH, Ghalambaz M. Electromagnetic field analysis and cooling system design for high power switched reluctance motor. International Journal of Numerical Methods for Heat & Fluid Flow. 2019; 29(5):1756-85.

Mirynowski EM. Commissioning of high speed imaging system for rainbow schlieren measurements of vaporizing liquid fuel sprays. The University of Alabama; 2016.

Rana P, Gupta V, Kumar L. Thermal instability analysis in magneto-hybrid nanofluid layer between rough surfaces with variable gravity and space-dependent heat source. International Journal of Modern Physics B. 2024; 38(04):2450051.

Zhang H, Shao S, Xu H, Zou H, Tian C. Free cooling of data centers: A review. Renewable and sustainable energy reviews. 2014; 35:171-82.

Murshed SS, De Castro CN. A critical review of traditional and emerging techniques and fluids for electronics cooling. Renewable and Sustainable Energy Reviews. 2017; 78:821-33.

Downloads

Published

28-05-2024

How to Cite

Jin, Z. (2024). Advancement of Liquid Immersion Cooling for Data Centers. Highlights in Science, Engineering and Technology, 97, 321-327. https://doi.org/10.54097/4fbbk041