Advances in Selective Catalytic Reduction Denitrification Catalysts
DOI:
https://doi.org/10.54097/g8crqc95Keywords:
Denitrification catalysts, NOx, SCR.Abstract
In recent years, significant progress has been made in the research of catalysts for Selective Catalytic Reduction (SCR) denitrification, and the design and synthesis of novel catalysts have improved the efficiency and selectivity of SCR technology in reducing NOx emissions. In this paper, several commonly used catalytic preparation methods are firstly introduced. Then the denitrification catalysts were classified into two categories, loaded and unloaded catalysts, and analysed in detail. The characteristics of catalysts such as crystal structure, specific surface area and pore structure have an important influence on the SCR performance, while the active sites and the mode of action of the reducing agent also play a decisive role. Improving the composition, structure and preparation process of catalysts is an important means to improve the activity and stability of catalysts. Future directions include in-depth study of the relationship between catalyst structure and performance, exploration of more efficient catalyst design and preparation methods, enhanced research on the reaction mechanism of SCR denitrification, and commitment to the study of green and sustainable SCR denitrification catalysts.
Downloads
References
[1] Denise Mauzerall, Babar Sultan, Namsoug Kim, et al. NOx emissions from large point sources: variability in ozone production, resulting health damages and economic costs. Atmospheric Environment, 2005, 39 (16): 2851-2866.
[2] Song Liyun, He Hong, Li Jian, et al. Progress in cerium based catalyst for selective catalytic reduction of NOx by NH3. Journal of the Chinese Society of Rare Earths, 2017, 35 (1): 69-82.
[3] Xu Ying, Yan Dongjie, Huang Xuemin, et al. Influence of preparation method on the low-temperature selective catalytic reduction activity of Mn-Ce/TiO2 catalyst. Journal of Environmental Engineering, 2015, 9 (02): 862-866.
[4] Chen Huanzhang, Li Hong, Li Hua. Preparation of Mn-Co-Fe/TiO2 catalyst and its low-temperature denitrification performance. Chemical Engineering, 2016, 44 (08): 6-10.
[5] Li Jian, Shi Liming, Lyu Shuangshuang, et al. Preparation of low-temperature SCR denitrification catalysts by manganese oxide-loaded diatomite-erolite porous ceramics. Environmental Chemistry, 2023, 42 (10) 3568-3578.
[6] Xu Jianwen, Wang Jiyuan, Chen Shaohui, et al. Research progress of titanium dioxide in catalysis. Modern Chemical Industry, 2011, 31 (05): 21-24+26.
[7] Liu Minghao, Song Wulin, Lu Zhao, et al. Progress in the study of solid-phase carriers of titanium dioxide nanoparticles. Materials Herald, 2021, 35 (09): 9108-9114.
[8] Xu Hong, Liao Xin, Qin Jianfeng, et al. Study on the selection of tungsten salt precursor in titanium tungsten powder for denitrification catalyst. Inorganic salt industry, 2014, 46 (05): 73-76.
[9] Jin Ruiben. Preparation, reaction mechanism and sulphur resistance of loaded Mn-Ce series low-temperature SCR denitrification catalyst. Zhejiang University, 2010.
[10] Liu Qingya, Liu Zhenyu. Honeycomb cordierite-based CuO/Al2O3 catalysts for simultaneous flue gas desulphurisation and denitrification. Journal of Fuel Chemistry, 2004, (03): 257-262.
[11] Guo J. Study on the performance and mechanism of denitrification by CeO2 modified MnOx/Al2O3 in low temperature SCR method. Hunan University, 2011.
[12] Liu N. Preparation of monolithic Cu-based ERI-type molecular sieve catalyst and its NH3-SCR performance. Jiangxi Normal University, 2023. DOI: 10.27178/d.cnki.gjxsu.2023.001304.
[13] Lu Yajing, Gou Liyuan, Peng Yu. Preparation of Cu-based SAPO-34 catalyst and its denitrification performance. Functional Materials, 2023, 54 (07): 7165-7170.
[14] Zhang Ranran, Li Yonghong. Research progress of Cu-based molecular sieve NH3-SCR denitrification catalyst. Modern Chemical Industry, 2015, 35 (08): 67-71. DOI: 10.16606/j.cnki.issn0253-4320.2015.08.002.
[15] Fan Xiaoxiong, Hao Lifang, Fan TuiGang, et al. Study on catalytic denitrification performance of LaMnO3/biochar catalyst for low-temperature NH3-SCR. Journal of Chemical Engineering, 2023, 74 (09): 3821-3830.
[16] Zhang Yaping, Wang Longfei, Li Juan, et al. Promotion of ZrO2 and WO3 in V2O5-WO3/TiO2-ZrO2 denitrification catalysts: catalytic properties, morphology, and reaction mechanism. Journal of Catalysis, 2016, 37 (11): 1918-1930.
[17] Yuesong Shen, Yuhao Zong, Guorong Sui, et al. Component optimisation and performance study of Ti-Al-Si-Ox denitrification catalyst carrier. Journal of Inorganic Materials, 2015, 30 (05): 542-548.
[18] Liu Ting, Wang Tingchun, Wu Ruiqing, et al. Research progress of low temperature NH3-SCR denitrification catalyst. Journal of Safety and Environment, 2012, 12 (06): 36-42.
[19] Chen Jianjun. Development of manganese-based catalyst and its mechanism of low temperature selective catalytic reduction of NOx. Tsinghua University, 2007.
[20] Yujia Xu. Optimisation of MnOx/TiO2 low temperature denitrification catalyst and its performance analysis. China Electric Power, 2013, 46 (07): 138-142.
[21] Yan Xiong, Tang Changjin, Yao Xiaojiang, et al. Effect of metal ions doping (M=Ti4+, Sn4+) on the catalytic performance of MnOx-CeO2 catalyst for low temperature selective catalytic reduction of NO with NH3. Applied Catalysis A: General, 2015, 495: 206-216.
[22] Xu Jia, Zhang Xinjian, Qi Guoqin, et al. Tungsten-cerium-zirconium composite metal oxide catalysts for medium and high temperature NH3-SCR reaction. Journal of Nanjing University of Technology (Natural Science Edition), 2022, 44 (04): 395-404.
[23] Xu Peng. Development of iron oxide-based catalysts and study of NH3-SCR reaction performance. Sichuan University, 2021. DOI: 10.27342/d.cnki.gscdu.2021.004605.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
