Application of nanotechnology in the negative electrode of Si-based lithium-ion batteries

Authors

  • Yuyue Geng

DOI:

https://doi.org/10.54097/15fnr841

Keywords:

Lithium-ion batteries; silicon materials; anode materials; nanomaterials.

Abstract

Modern electronics and electric cars frequently employ lithium-ion batteries (LIBs) because of their excellent energy density, safety, and environmental friendliness. The anode of LIBs is typically composed of carbon. Nevertheless, it loses a lot of energy when charging and draining. Lithium metal precipitates quickly from the surface of carbon electrodes and forms dendrites. These can pass through the diaphragm and cause short circuits inside the battery, posing a public safety risk. The advantages of the silicon-based anode are excellent safety, low operating voltage, and high theoretical specific capacity. It is among the most critical potential materials for high-energy-density lithium-ion batteries. However, its drawbacks, such as volume expansion and poor electrical conductivity, limit the development of LIBs. In recent years, the emergence of nanotechnology has well solved these problems. This paper first explains how silicon-based lithium-ion batteries work and summarizes the challenges of silicon-based anodes. Then, it explores the application of nanotechnology in silicon-based anode, including different dimensions of silicon nanomaterials. After the group, the paper analyzes the shortcomings of current research and proposes future directions.

Downloads

Download data is not yet available.

References

[1] Sharma Ram A., Seefurth Randall N. Thermodynamic properties of the lithium-silicon system. Journal of the Electrochemical Society, 1976, 123(12): 1763-1768.

[2] Wang L, Xi F., Zhang Z, et al. recycling of photovoltaic silicon waste for high-performance porous silicon/silver/carbon/graphite anode. Waste Management, 2021, 132: 56-63.

[3] Zhang H, Wang L, Li H, ET AL. Criterion for Identifying Anodes for Practically Accessible High-Energy-Density Lithium-Ion Batteries. ACS Energy Lett, 2021, 6: 3719-3724.

[4] Ge MZ, Cao CY, Biesold G., et al. Recent advances in silicon-based electrodes: from fundamental research toward practical applications. Advanced Materials, 2021, 33(16): e2004577.

[5] Sun L, Su T, Xu L, et al. Preparation of uniform Si nanoparticles for high-performance Li-ion battery anodes. Physical Chemistry Chemical Physics, 2016, 18(3): 1521-1525.

[6] Wu F, Dong Y, Su Y, et al. benchmarking the effect of particle size on silicon anode materials for Lithium-ion batteries. Small, 2023, 19: 2301301.

[7] Yang H, Shang H, Zhang X. Properties of silicon nanoparticles prepared by pulse discharge and ball milling. Nanoscale, 2024, 16: 14510-14521.

[8] Zhao J, Rui B, Wei W, et al. encapsulating silicon particles with graphitic carbon enables high-performance lithium-ion batteries. Journal of Colloid and Interface Science, 2021, 607(2): 1562-1570.

[9] Hu Z, Tan Z, Sun F, et al. The high cycling performance of ultra-thin Si nanowires fabricated by metal-assisted chemical etching as lithium-ion batteries anode. Journal of Electroanalytical Chemistry, 2020, 878: 114567.

[10] Edna Mados, Nimrod Harpak, George Levi, et al. Synthesis and electrochemical performance of silicon-nanowire alloy anodes. RSC Advances, 2021, 11: 26586-26593.

[11] Ghulam Farid, Roger Amade-Rovira, and Rogelio Ospina, et al. Surface modification of silicon nanowires via drop-casting for high-performance Li-ion battery electrodes: SiNWs decorated with molybdenum oxide nanoparticles. Journal of Energy Storage, 2024, 78: 110104.

[12] Fan X, Cai T, Wang S, et al. Carbon nanotube-reinforced dual carbon stress-buffering for highly stable silicon anode material in lithium-ion battery. Small, 2023, 19: 2300431.

[13] Liu L, Li M, Chu L, et al. Facile fabrication of flexible Si-based nanocomposite films as high-rate anodes by layer-by-layer self-assembly. Applied Surface Science, 2019, 476: 501-512.

[14] Wang H, Tang W, Ni L, et al. Synthesis of silicon nanosheets from kaolinite as a high-performance anode material for lithium-ion batteries. Journal of Physics and Chemistry of Solids, 2020, 137: 109277.

[15] Wang J, Gao C, Yang Z, et al. Carbon-coated mesoporous silicon shell-encapsulated silicon nano-grains for high-performance lithium-ion batteries anode. Carbon, 2022, 192: 277-284.

Downloads

Published

07-11-2024

How to Cite

Geng, Y. (2024). Application of nanotechnology in the negative electrode of Si-based lithium-ion batteries. Highlights in Science, Engineering and Technology, 116, 208-213. https://doi.org/10.54097/15fnr841