Research Progress on Solid-state Electrolyte Interface Problems in Lithium-ion Batteries

Yuezhu Hao

doi:10.54097/027sh190

Authors

Yuezhu Hao

DOI:

https://doi.org/10.54097/027sh190

Keywords:

Solid-state electrolyte, interface problems, modified strategy.

Abstract

Nowadays, compared with traditional liquid batteries, solid-state batteries have the superiorities of higher energy density, power density and safety due to their solid electrolytes. However, a series of interfacial problems at solid-solid interface have always hindered the further development of solid-state batteries. Based on these problems, this paper firstly introduces the types of solid-state batteries and interface, secondly describes the mechanical failure principles of cathode interface and anode interface, and finally elaborates the corresponding modification strategies for cathode interface and anode interface. By adopting various improved measures for these interfacial problems, the progress of wider commercialization of solid-state batteries can be facilitated.

Downloads

Download data is not yet available.

References

[1] WU J H, YANG J, LIU G Z, et al. Ten years of solid-state lithium batteries (2011-2021) retrospect and prospect [J]. Energy Storage Science and Technology, 2022, 11 (9): 2713-2745.

[2] INADA R, TAKEDA A, YAMAZAKI Y, et al. Effect of postannealing on the properties of a Ta-doped Li7La3Zr2O12 solid electrolyte degraded by Li dendrite penetration [J]. ACS Appl Energ Mater, 2020, 3 (12): 12517-12524.

[3] ZHU Y Q, WU T, SUN J G, et al. Highly conductive lithium aluminum germanium phosphate solid electrolyte prepared by sol-gel method and hot-pressing [J]. Solid State Ion, 2020, 350: 6.

[4] THANGADURAI V, WEPPNER W. Effect of B-site substitution of (Li, La) TiO3 perovskites by di-, tri-, tetra- and hexavalent metal ions on the lithium ion conductivity [J]. Ionics, 2000, 6 (1/2): 70-77.

[5] DIETRICHA C, WEBER D A, SEDLMAIER S J, et al. Lithium ion conductivity in Li2S-P2S5 glasses-building units and local structure evolution during the crystallization of superionic conductors Li3PS4, Li7P3S11 and Li4P2S7 [J]. J Mater Chem A, 2017, 5 (34): 18111-18119.

[6] YU C, VAN EIJCK L, GANAPATHY S, et al. Synthesis, structure and electrochemical performance of the argyrodite Li6PS5Cl solid electrolyte for Li-ion solid state batteries [J]. Electrochim Acta, 2016, 215: 93-99.

[7] CHENG Z W, LIU T, ZHAO B, et al. Recent advances in organic inorganic composite solid electrolytes for all-solid-state lithium batteries [J]. Energy Storage Materials, 2021, 34: 388-416.

[8] LIU L J, ZHI H R, ZHANG K Y, et al. Research progress on interfacial modification technology of inorganic solid-state electrolyte [J]. Functional Material, 2024, 55 (06): 6079-6087.

[9] ZHANG A B, WANG C Y, ZHAO S Q, et al. Progress in the study of the properties of the cathode/electrolyte interface in solid-state batteries [J]. Materials Engineering, 2022, 50 (11): 46-62

[10] TIKEKAR M D, ARCHER L A, KOCH D L. Stabilizing electrodeposition in elastic solid electrolytes containing immobilized anions [J]. Science Advances, 2016, 2 (7): e1600320.

[11] GANSER M, HILDEBRAND F E, MCMEEKING R M, et al. Stiffer is not necessarily better: requirements analysis for binary solid polymer electrolytes that ensure stable lithium metal electrodes [J]. Journal of The Electrochemical Society, 2020, 167 (13): 130525.

[12] STONE G M, MULLIN S A, TERAN A A, et al. Resolution of the modulus versus adhesion dilemma in solid polymer electrolytes for rechargeable lithium metal batteries [J]. Journal of The Electrochemical Society, 2012, 159 (3): A222-A227.

[13] VERMA A, KAWAKAMI H, WADA H, et al. Microstructure and pressure-driven electrodeposition stability in solid-state batteries [J]. Cell Reports Physical Science, 2021, 2 (1): 100301.

[14] TANTRATIAN K, YAN H H, ELLWOOD K, et al. Unraveling the Li penetration mechanism in polycrystalline solid electrolytes [J]. Advanced Energy Materials, 2021, 11 (13): 2003417.

[15] YUAN C H, GAO X, JIA Y K, et al. Coupled crack propagation and dendrite growth in solid electrolyte of all-solid-state battery [J]. Nano Energy, 2021, 86: 106057.

[16] SHISHVAN S S, FLECK N A, DESHPANDE V S. The initiation of void growth during stripping of Li electrodes in solid electrolyte cells [J]. Journal of Power Sources, 2021, 488: 229437

[17] SHISHVAN S S, FLECK N A, MCMEEKING R M, et al. Dendrites as climbing dislocations in ceramic electrolytes: initiation of growth [J]. Journal of Power Sources, 2020, 456: 227989.

[18] BISTRI D, LEO C. Modeling of chemo-mechanical multi-particle interactions in composite electrodes for liquid and solid-state Li-Ion batteries [J]. Journal of The Electrochemical Society, 2021, 168 (3): 030515.

[19] FATHIANNASAB H, ZHU L K, CHEN Z W. Chemo-mechanical modeling of stress evolution in all-solidstate lithium-ion batteries using synchrotron transmission X-ray microscopy tomography [J]. Journal of Power Sources, 2021, 483: 229028.

[20] LI Y Y, LI Z. Progress on the cathode interface of all-solid-state lithium-ion batteries [J]. Materials Progress in China, 2020 (4):1-8.

[21] BANERJEE A, WANG X, FANG C, et al. Interfaces and interphases in all-solid-state batteries with inorganic solid electrolytes [J]. Chemical Reviews, 2020, 120: 6878-6933.

[22] HE Q, GAO J L, ZHU B H, et al. Progress of the study of key issues on the interface between cathode/anode of solid-state lithium batteries [J]. Shandong Chemical Industry, 2023, 52 (17): 86-88.

[23] HUANG Y, CHEN B, DUAN J, et al. Graphitic carbon nitride (g-C3N4): an interface enabler for solid-state lithium metal batteries [J]. Angewandte Chemie-International Edition, 2020, 59 (9): 3699-3704.

[24] SHAO Y, WANG H, GONG Z, et al. Drawing a soft interface: an effective interfacial modification strategy for garnet-type solid-state Li batteries [J]. ACS Energy Letters, 2018, 3 (6): 1212-1218.

[25] LIU Y, LIN D, JIN Y, et al. Transforming from planar to three-dimensional lithium with flowable interphase for solid lithium metal batteries [J]. Science Advances, 2017, 3 (10): eaao0713.