Production process of 800 t/d sintered lime rotary kiln
DOI:
https://doi.org/10.54097/6h2x7m35Keywords:
sintered lime, rotary kiln, production process, preheater, calcination.Abstract
This paper presents a detailed analysis of the production process and technical characteristics of the 800t/d sintered lime rotary kiln in Beitai Iron Mine of Bensteel Group Corporation Limited. The production process encompasses a number of key stages, including the charging of raw materials, firing, the crushing and screening of finished products, storage and transportation, exhaust gas treatment, and pulverized coal preparation. The study will prove a valuable point of reference for the enhancement of the overall performance of the domestic sintered lime industry.
Downloads
References
[1] Xu, F., Wei, H., Qian, W., Chen, X., Xu, T., He, Y., & Wen, G. (2020). Experimental investigation on replacing cement by sintered limestone ash from the steelmaking industry for cement-stabilized soil: Engineering performances and micro-scale analysis. Construction and Building Materials, 235, 117425.
[2] Hao, H. Q., Zhang, Y. Z., Hao, S. J., Zhang, C. F., Jiang, W. F., & Gui, P. H. (2016). Preparation and metallurgical analysis of high activity burnt lime for steelmaking. Journal of Iron and Steel Research International, 23(9), 884-890.
[3] Zhang, D., Fang, K., Xu, D., Cui, S., & Wang, D. (2023). Evaluation of the environmental medium erosion resistance of natural hydraulic lime and metakaolin-air lime mortars. Case Studies in Construction Materials, 18, e02044.
[4] Gupta, P., Sarkar, S., & Roy, T. K. A Strategy for Partial Replacement of Lime by Limestone and Its Impact on Basic Oxygen Furnace Steelmaking. Steel Research International, 2400030.
[5] Tang, B., Li, X. Y., Cheng, H. C., Wang, J., & Zhang, Y. L. (2017, August). The Research Process on Converter Steelmaking Process by Using Limestone. In IOP Conference Series: Earth and Environmental Science (Vol. 81, No. 1, p. 012175). IOP Publishing.
[6] Shahin, H., Hassanpour, S., & Saboonchi, A. (2016). Thermal energy analysis of a lime production process: Rotary kiln, preheater and cooler. Energy Conversion and Management, 114, 110-121.
[7] Romero, J. M., Pardo, Y. S., Parra, M., Castillo, A. D. J., Maury, H., Corredor, L., ... & Gonzalez-Quiroga, A. (2022). Improving the rotary kiln-electric furnace process for ferronickel production: Data analytics-based assessment of dust insufflation into the rotary kiln flame. Alexandria Engineering Journal, 61(4), 3215-3228.
[8] Ditaranto, M., & Bakken, J. (2019). Study of a full scale oxy-fuel cement rotary kiln. International journal of greenhouse gas control, 83, 166-175.
[9] Zhang, K., Wang, S., Li, C., Sun, H., & Zhang, Y. (2023). Decomposition Mechanism and Calcination Properties of Small-Sized Limestone at Steelmaking Temperature. Processes, 11(4), 1008.
[10] Zheng, T., Tao, Y., Luo, X., Qi, X., Zhao, J., Wang, X., ... & Wang, L. (2024). Application of an integrated device for ultra-low temperature desulfurization and denitration in large rotary kiln. Transactions on Engineering and Technology Research, 2, 15-18.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Highlights in Science, Engineering and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
