Fatigue Life Calculation of Tubing for In Situ Drilling Rig
DOI:
https://doi.org/10.54097/hset.v25i.3480Keywords:
drill in situ, tubing, fatigue life, internal pressure.Abstract
The severe bending strain that the tubing of the in-situ drilling rig is subjected to during the operation under pressure, which exceeds the elastic limit, will cause periodic plastic deformation of the tubing of the in-situ drilling rig, so that fatigue cracks will occur on the internal and external surfaces of the tubing of the in-situ drilling rig and expand rapidly, leading to the greatly shortened service life of the tubing of the in-situ drilling rig. Based on the stress analysis of the dangerous points of the tubing of the in-situ drilling rig, the relationship between the predicted and the standard measured tubing life of the in-situ drilling rig is obtained in this paper. The number of tubing cycles of in-situ drilling rig decreases sharply with the increase of internal pressure. The greater the internal pressure is, the greater the circumferential stress and uniaxial alternating stress are, which causes the number of tubing cycles of in-situ drilling rig to decrease when tubing fails. It shows that the fatigue life of tubing of in-situ drilling rig is significantly affected by internal pressure.
Downloads
References
Manson S S. Fatigue: A Complex Subject Some Simple approximations [J]. J.of Experiment Mechanics,1965, 5(7): 193-226.
MA Qiurong, LI Yang, YANG Kun. Study on the test of fatigue life pre-diction for X80 line pipe[J]. Applied mechanics and materials, 2014, 692(9/10): 387-390.
Zhao Z P, Qiao G Y, LI G P, et al. Fatigue properties offerrite/bainite d-ual-phase X80 pipeline steel welded joints[J]. Scienceand technology of welding and joining, 2016, 22(3): 217-226.
The American Society of Mechanical Engineers. ASME FFS-1 2007 fitness-for-service-1: API 579[S]. Washington: American Petroleum Institute, 2007.
FRIES Thomas Peter, BELYTSCHKO Ted. The extended/generalized finite element method: an over view of the method and its applications[J]. International journal for numerical methods inengineering, 2010, 84(3): 253-304.
Li Luxian, Wang Tiejun, The extended finiteelement method and its applica-tions[J]. Advances in mechanics, 2005, 35(1): 5-20.
Wang Youqiang, Zhang Siwei, Fang Aiguo. Overview of Failure Forms and Causes of Coiled Tubing [J]. Petroleum Field Machinery, 1999, 28 (4): 15-18.
Li Haibo, Wang Haitao. Research on on-site coiled tubing damage and ser-vice life[J]. Inner Mongolia Petrochemical, 2008 (20): 11-13.
Wan Fu 1, Zhou Zhaoming 2, Zhang Jian 1, Zhou Yonglin 1, Wang Zhe 1, Optimization of coiled tubing fatigue life prediction based on online inspec-tion data[J], Drilling&Production Technology, 2020, Volume 43, Issue 6, P9-12, 6.
Bandara, Chaminda S.1; Siriwardane, Sudath C.2; Dissanayake, Udaya I.1; Dissanayake, Ranjith1, Developing a full range S–N curve and estimating cum-ulative fatigue damage of steel elements[J]. Computational Materials Science, 2015, Vol.96, Part A, 96-101
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
