Tight gas fracturing productivity calculation model based on gas-water permeability curve
DOI:
https://doi.org/10.54097/hset.v25i.3514Keywords:
phase infiltration curve, normalization, fracturing straight well production.Abstract
Measuring well production per well can not only simplify the process flow, improve economic efficiency, but also reduce the development cost of the oil field. In this paper, a single-well measurement of oil well production is carried out by establishing a capacity calculation model for fracturing straight wells in tight gas reservoirs by means of gas-water phase infiltration curve. According to different permeability and porosity, several representative relative permeability curves are selected for normalization treatment, and then the angle-preserving transformation principle is used, considering the formation stress sensitivity effect and gas slip effect, as well as the stress sensitivity effect in the fracture and the effect of high-speed non-Daxi effect on gas seepage, the quasi-pressure function is introduced, and the capacity calculation model of the fracturing straight well of the tight gas reservoir is established, so as to achieve the calculation of the yield.
Downloads
References
Zhang Jiqiang. Research on reasonable production allocation and stable production capacity of fractured Wells in tight gas reservoirs [D]. Southwest Petroleum University, 2015.
HENG Yong. Study on gas-water distribution law and water control countermeasures based on reservoir architecture analysis [D]. Chengdu University of Technology, 2018.
LIU Li. Experimental study of compound surfactant to reduce water locking effect in low permeability reservoir [D]. Ocean University of China, 2011.
HU Yong. Study on seepage mechanism of tight sandstone gas reservoir [D]. Northeast Petroleum University, 2016.
Huang Yongzhi. Study on gas-water coupling flow law in GB low permeability gas reservoir [D]. Southwest Petroleum University,2018.
Li Yuansheng, Yang Zhixing, Teng Sainan, et al. Prediction of water breakthrough time for edge water gas reservoir considering reservoir dip Angle and water invasion [J]. Petroleum drilling techniques, 2017, 45(01): 91-96.
Hu Yong, Guo Changmin, Xu Xuan, et al. Pore throat structure and seepage characteristics of sandstone gas reservoir [J]. Petroleum geology & experiment,2015,37(03):390-393.
Kai Zhou, Wei Sun, Zheng Wang, et al. Characteristics and influencing factors of tight sandstone reservoir facies permeability in middle Permian He_8-Shan_1member, eastern Sulige Gas Field [J]. Natural gas exploration and development,2016,39(02):31-35+10-11.
Liu Jinshui, Tang Jiancheng. Microscopic pore structure and seepage characteristics of low-permeability reservoir in Xihu Sag and its geological significance: A case study of HY Structure Huagang Formation [J]. China offshore oil and gas, 2013, 25(02): 18-23.
Zhang Jiqiang, Li Xiaoping, Luo Cheng, et al. A new method of calculating post-fractured gas well productivity based on elliptic flow model [J]. Natural gas & oil, 2015, 33(06): 46-50+10-11.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
