Designing And Modeling Of De Havilland Canada Dash 8 Q300 Base on Simpleplanes
DOI:
https://doi.org/10.54097/hset.v38i.5995Keywords:
3D modeling; De Havilland Canada Dash 8 Q300; simpleplanes.Abstract
Mathematics development is aided by image-based 3D modeling. In certain ways, visual 3D modeling should be considered a branch and application of mathematical morphology. Airplanes are sometimes required in the scene due to storyline requirements. Due to the complexity and time-consuming characteristics of traditional modeling methods, this paper put forward a model making scheme using SimplePlanes software was proposed. After development and testing based on SimplePlanes software, the model is similar to the real aircraft, and using SimplePlanes will save a lot of time and meet the use requirements. In this paper, the method of modeling De Havilland Canada Dash 8 Q300 using SimplePlanes is explained in detail together with the basic modeling logic of this software. A user study is performed to demonstrates the overall good quality of the result and a significant improvement in terms of time efficiency.
Downloads
References
Branch A . De Havilland Canada DHC-8-311 Dash 8, G-BRYJ. DfT Accident Investigation, 2008, 23:33-39.
Cline A H . Jazz Rebrands as Air Canada Express. Air International, 2011, 81(6):p.40.
Bureau A. Engine in-flight shutdown, deHavilland Canada Dash 8, VH-TQR. http://www.atsb.gov.au/publications/investigation_reports/2005/a
West C . Bombardier Dash 8 at 30. Airliner World, 2013:40-48.
Casadio, R. , Jacoboni, I. , Messina, A. ,Pinto, V. D. A 3d model of the voltage-dependent anion channel (vdac). Federation of European Biochemical Societies Letters. 2002, 358(32): 158-168.
Se, S. Photo-realistic 3D model reconstruction. IEEE International Conference on Robotics & Automation. 2006 3(2): 571-582.
Xiong H, Ming P, Zhang X. 3D modeling method for computer animate based on modified weak structured light method, Optoelectronic Imaging and Multimedia Technology. International Society for Optics and Photonics, 2010:432-446.
Hsi-Yung, Feng, and, et al. Integrated tool path and feed rate optimization for the finishing machining of 3D plane surfaces. International Journal of Machine Tools & Manufacture, 2000, 78(4): 329-338.
Defoort S, Ferrier M, Serre L. Design and full 3D nose-to-tail computation of a turbofan+ scramjet Mach 8 civil aircraft. 19th AIAA International Space Planes and Hypersonic Systems and Technologies Conference. 2014, 438-445.
Momihara K, Mishima M, Jimbo M. A decomposition of the 2-design formed by the planes in AG(2n, 3). Finite fields and their applications, 2012, 18(5):956-970.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
