Parametric stiffness modeling of a variable cross-section link for a collaborative robot
DOI:
https://doi.org/10.54097/hset.v43i.7441Keywords:
Collaborative robot, Variable cross-section link, Parametric stiffness model.Abstract
This paper describes how a parametric stiffness model of the variable cross-section link of a collaborative robot is obtained. The variable cross-section link module is divided into three parts: the front connection part, the rear connection part, and the main part. The static condensation method is used to model the stiffness of the connecting parts. The parametric stiffness modeling of the main part is carried out using the structural mechanics method. The stiffness models of the three parts are integrated into the parametric stiffness model of the entire link. The parametric stiffness model of the variable cross-section link is related to the structural dimensions of the link. The elastic deformation errors in all directions obtained from the stiffness model are within 5%. The method establishes the mapping relationship between the link’s structural dimensions and its stiffness model. Based on this, the structural optimization of a collaborative robot based on parametric stiffness model is made possible.
Downloads
References
Carbone, G., 2011, "Stiffness analysis and experimental validation of robotic systems," Frontiers of Mechanical Engineering.
Deblaise, D., Hernot, X., and Maurine, P., "A systematic analytical method for PKM stiffness matrix calculation," Proc. Robotics and Automation, 2006. ICRA 2006. Proceedings 2006 IEEE International Conference on.
Klimchik, A., Pashkevich, A., and Chablat, D., 2018, "Fundamentals of manipulator stiffness modeling using matrix structural analysis," Mechanism and Machine Theory, 133, pp. 365 - 394.
Bao, S., and Gong, Y., 2006, Structural Mechanics, Structural Mechanics.
Wei, W., Cai, G., Gong, J., and Peng, S., 2021, "Modeling and Analysis of the Stiffness Distribution of Host–Parasite Robots," IEEE Access, PP (99), pp. 1 - 1.
Zhang, J. F., Li, J., Yin, H. N., Chen, H., and Ye, Y. S., 2020, "Element stiffness matrix of tapered Euler beam element including shear deformation," Structural Engineer, 36 (2), p. 8.
Peng, X. A., Xy, A., Sl, A., Hao, W. B., Kl, A., Ask, B., Wen, F., and Gb, A., "Stiffness modeling of an industrial robot with a gravity compensator considering link weights - ScienceDirect," Mechanism and Machine Theory, 161.
Reddy, J. N. J. N., 2013, An Introduction To The Finite Element Method, An introduction to the finite element method /.
Meng, L. X., Lu, N. L., and Liu, S. M., 2011, "Exact Expression of Element Stiffness Matrix for a Tapered Beam and Its Application in Stability Analysis," Advanced Materials Research, 255 - 260, pp. 1968 - 1973.
Du, L., Lan, P., and Lu, N. L., 2014, "Tangent Stiffness Matrix of Spatial Beam Element Considering Bend and Torsion Coupling Effect," Advanced Materials Research, 1021, pp. 73 - 78.
Lu, N. L., and Meng, L. X., 2011, "The Element Stiffness Matrix of a Tapered Beam with Effects of Shear Deformation and its Stability Application," Advanced Materials Research, 308-310, pp. 1383 - 1388.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
