Research Status and Prospect of Surface Textured Rolling Bearings

Yueyong Wang; Tianjiao Liu; Liang Yao; Chunhai Shan

doi:10.54097/7c6mv333

Authors

Yueyong Wang
Tianjiao Liu
Liang Yao
Chunhai Shan

DOI:

https://doi.org/10.54097/7c6mv333

Keywords:

Rolling Bearings, Surface Texture, Status and Prospect

Abstract

Surface texture refers to the process of creating a series of microstructures with a specific distribution pattern and size on the surface of mechanical components using machining equipment. This technique improves the lubrication, friction, and wear performance of contact surfaces. Researchers have conducted extensive optimization of surface texture geometric features and operating conditions to study the mechanisms and applications of surface texture technology. This paper reviews the development and processing methods of surface texture technology, as well as the main research achievements in controlling rolling bearing friction in recent years. It discusses the latest advances in improving the tribological performance of material surfaces from two aspects: the geometric features of surface texture and practical operating conditions. The geometric features include the shape, diameter, depth, areal density, and arrangement of the surface texture. Practical operating conditions depend on the type of friction and operational conditions. An analysis and summary of the parameters and conditions that improve surface tribological performance are presented. The paper also reveals the mechanism of laser surface texture’s effect on the friction and wear performance of rolling bearings. Future research will need to extend the test duration, optimize texture parameters (such as external profile, size, bottom shape, and laser parameters), and apply artificial intelligence algorithms like deep learning and neural networks. These areas will be the focus of future research.

Downloads

Download data is not yet available.

References

[1] Mao Y. Study on Laser texture Mechanism and tribological Properties of Textured Dynamic Pressure Plain Bearing [D]. Luoyang: Henan University of Science and Technology, 2021.

[2] Zhao W, Wang L, Xue Q. Research progress of texturization to improve tribological properties of surface [J]. Tribology journal, 2011, 31(06):622-631.

[3] Li X, Deng J, Yue H, et al. Wear performance of electrohydrodynamically atomized WS2 coatings deposited on biomimetic shark-skin textured surfaces[J]. Tribology International, 2019, 134: 240-251.

[4] Lu Y, Hua M, Liu Z. The biomimetic shark skin optimization design method for improving lubrication effect of engineering surface[J]. Journal of Tribology, 2014, 136(3): 031703.

[5] Samaha M, Tafreshi H, Gad-el-Hak M. Superhydrophobic surfaces: From the lotus leaf to the submarine[J]. Comptes Rendus Mecanique, 2012, 340(1-2): 18-34.

[6] Rosenkranz A, Costa H, Profito F, et al. Influence of surface texturing on hydrodynamic friction in plane converging bearings-An experimental and numerical approach[J]. Tribology International, 2019, 134: 190-204.

[7] Rosenkranz A, Heib T, Gachot C, et al. Oil film lifetime and wear particle analysis of laser-patterned stainless steel surfaces[J]. Wear, 2015, 334: 1-12.

[8] Etsion I. Improving tribological performance of mechanical components by laser surface texturing[J]. Tribology Letters, 2004, 17: 733-737.

[9] Vladescu S, Olver A, Pegg I, et al. The effects of surface texture in reciprocating contacts–an experimental study[J]. Tribology International, 2015, 82: 28-42.

[10] Wang J, Wang X. Review and prospect of surface texture innovative design [J]. Journal of Mechanical Engineering, 2015, 51(23): 84-95.

[11] Chakraborty M, Weibel J, Schaber J, et al. The Wetting State of Water on a Rose Petal[J]. Advanced Materials Interfaces, 2019, 6(17): 900652.

[12] Federle W, Barnes W, Baumgartner W, et al. Wet but not slippery: Boundary friction in tree frog adhesive toe pads[J]. J R Soc Interface, 2006, 3(10): 689-697.

[13] Yu H, Yuan S, Sun Z. Effect of micro-pitting shape on surface friction characteristics of specimens [J]. Journal of South China University of Technology (Natural Science Edition), 2011, 39(01): 106-110+123.

[14] Nagato K, Yajima Y, Nakao M. Laser-Assisted thermal imprinting of microlens arrays—effects of pressing pressure and pattern size[J]. Materials, 2019, 12(4): 675.

[15] Long R, Sun S, Zhang Y. Wear behavior of pits textured grey cast iron rings with Zr/ZrN coatings under dry sliding[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, 235(6): 1251-1261.

[16] Sedlaček M, Podgornik B, Ramalho A, et al. Influence of geometry and the sequence of surface texturing process on tribological properties[J]. Tribology International, 2017, 115: 268-273.

[17] Bonse J, Kirner S, Griepentrog M, et al. Femtosecond laser texturing of surfaces for tribological applications[J]. Materials, 2018, 11(5): 801.

[18] Xu Y, Han X, Xu J. Influence of laser surface texture micro-pit morphology and area occupancy on tribological properties of nitrided cylinder liner [J]. Surface engineering in China,2021,34(04):149-157.

[19] Hamilton D, Walowit J, Allen C. A theory of lubrication by microirregularities[J]. Journal of Fluids Engineering, 1966, 88(1): 177-185.

[20] Etsion I, Kligerman Y, Halperin G. Analytical and experimental investigation of laser-textured mechanical seal faces[J]. Tribology Transactions, 1999, 42(3): 511-516.

[21] Zhao Y. Study on the influence of spherical pitting Texture on tribological Characteristics of Dynamic pressure plain bearings [D]. Luoyang: Henan University of Science and Technology,2019.

[22] Kou B, Li Z, Zhang Z. Effect of pitting surface Texture on lubrication performance of ball joint with high water base [J]. Surface engineering in China,2022,35(04):172-186.

[23] Zhao S. Effect of pitting texture position on friction and wear performance of rolling bearing [D]. Shenyang: Shenyang University of Chemical Technology,2022.

[24] Zhou D, Wu L, Xu Y. Experimental study on the influence of texture reduction by laser pit dismantling on load bearing performance of interference fit [J]. Journal of Mechanical Engineering,2022, 58(23): 208-217.

[25] Chen J. Chen W, Wang Z. Research progress on friction and wear characteristics of piston-cylinder liner surface texture [J]. Surface technology:1-13[2023-05-21].

[26] Ezhilmaran V, Vasa N, Vijayaraghavan L. Investigation on generation of laser assisted dimples on piston ring surface and influence of dimple parameters on friction[J]. Surface Coatings Technology, 2018, 335: 314-326.

[27] Zhao J, Li Z, Zhang H, et al. Effect of micro-textures on lubrication characteristics of spur gears under 3D line-contact EHL model[J]. Industrial Lubrication and Tribology, 2021, 73(9): 1132-1145.

[28] Gupta N, Tandon N, Pandey R, et al. Tribodynamic studies of textured gearsets lubricated with fresh and MoS2 blended greases[J]. Tribology International, 2022, 165: 107247.

[29] Han K, Li J, Wang Q, et al. Study on oil film pressure distribution and load capacity of textured rolling bearings[J]. Industrial Lubrication Tribology, 2020, 72(7): 961-967.

[30] Long R, Shang Q, Jin Z, et al. Tribological behavior of laser textured rolling element bearings under starved lubrication[J]. Industrial Lubrication Tribology, 2022, 74(5): 453-462.

[31] Vidyasagar K, Pandey R, Kalyanasundaram D. Improvement of Deep Groove Ball Bearing’s Performance Using a Bionic Textured Inner Race[J]. Journal of Bionic Engineering, 2021, 18(4): 974-990.

[32] Chyr A, Qiu M, Speltz J, et al. A patterned microtexture to reduce friction and increase longevity of prosthetic hip joints[J]. Wear, 2014, 315(1-2): 51-57.

[33] Xu T. Study on bionic design of artificial hip joint surface and its frictional lubrication characteristics [D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2016.

[34] Wang X. Multi-objective optimization of lubrication and leakage characteristics of textured mechanical seals [D]. Nanjing: Nanjing University of Aeronautics and Astronautics,2019.

[35] Wang X, Shi L, Dai Q, et al. Multi-objective optimization on dimple shapes for gas face seals[J]. Tribology International, 2018, 123: 216-223.

[36] Sun F, Shen H, Li J.Effect of Pit Diameter of Textured Tool on knife-chip friction Characteristics [J]. Journal of Shenyang Polytechnic University,2022,41(05):81-85+90.

[37] Guo J, Wang X, Zhao Y. New progress in preparation technology and machining performance of Micro-textured tools [J]. Journal of Mechanical Engineering,2021,57(13):172-200.

[38] Ahmed Y, Paiva J, Arif A, et al. The effect of laser micro-scale textured tools on the tool-chip interface performance and surface integrity during austenitic stainless-steel turning[J]. Applied Surface Science, 2020, 510: 145455.

[39] Yu R, Chen W. Research status and prospect of surface texturization in industrial tribology [J]. Journal of Mechanical Engineering,2017,53(03):100-110.

[40] Zhao X,He L,Yuan S.Research progress of surface micro-texture in cutting process [J]. Surface technology,2022,51(06):100-127.

[41] Denkena B, Köhler J, Kästner J, et al. Efficient Machining of Microdimples for Friction Reduction[J]. Journal of Micro and Nano-Manufacturing, 2013, 1(1): 011003.

[42] Wakuda M, Yamauchi Y, Kanzaki S. Effect of workpiece properties on machinability in abrasive jet machining of ceramic materials[J]. Precision engineering, 2002, 26(2): 193-198.

[43] Aizawa T, Wasa K, Tamagaki H. A DLC-Punch Array to Fabricate the Micro-Textured Aluminum Sheet for Boiling Heat Transfer Control[J]. Micromachines (Basel), 2018, 9(4): 147.

[44] Qu N, Zhang T, Chen X. Surface Texturing of Polyimide Composite by Micro-Ultrasonic Machining[J]. Journal of Materials Engineering and Performance, 2018, 27(3): 1369-1377.

[45] Vilhena L, Sedlaček M, Podgornik B, et al. Surface texturing by pulsed Nd: YAG laser[J]. Tribology International, 2009, 42(10): 1496-1504.

[46] Lei S, Devarajan S, Chang Z. A study of micropool lubricated cutting tool in machining of mild steel[J]. Journal of Materials Processing Technology, 2009, 209(3): 1612-1620.

[47] Arslan A, Masjuki H, Kalam M, et al. Surface Texture Manufacturing Techniques and Tribological Effect of Surface Texturing on Cutting Tool Performance: A Review[J]. Critical Reviews in Solid State and Materials Sciences, 2016, 41(6): 447-481.

[48] Nasir F, Ghani J, Zamri W, et al. State-of-the-art surface texturing and methods for tribological performance[J]. World Review of Science, Technology Sustainable Development, 2019, 15(4): 330-357.

[49] Wu Y. Analysis of Lubrication performance of Surface Textured angular contact ball bearing [D]. Lanzhou: Lanzhou University of Technology,2022.

[50] Zhang D. Tribological Analysis of Surface Texture in Rolling Bearing System [J]. bearing,2019,472(03): 30-34+57.

[51] Jin Z,Ju Z,Long R.Effect of pitting Texture on Dry Friction Performance of 81107-TN thrust cylindrical roller Bearing [J]. bearing,2021,501(08):11-15+21.

[52] Long R, Ma Q, Jin Z, et al. Tribological behavior of dimples textured rolling element bearings under stepped load and starved lubrication[J]. Industrial Lubrication and Tribology, 2022, 74(7): 876-883.

[53] Long R, Zhao C, Jin Z, et al. Influence of groove dimensions on the tribological behavior of textured cylindrical roller thrust bearings under starved lubrication[J]. Industrial Lubrication Tribology, 2021, 73(6): 971-979.

[54] Lu J.Mechanical Analysis of rolling bearings and Characterization and design of Raceway Surface Morphology [D]. Hefei: Hefei University of Technology,2015.

[55] Xing G.Oil film lubrication Characteristics of tapered roller bearing Textured inner ring with large flange [D]. Luoyang: Henan University of Science and Technology,2014.

[56] Zhang K.Study on texturing technology and Lubrication Characteristics of guide surface of rolling bearing [D]. Harbin: Harbin Institute of Technology,2019.

[57] Bhardwaj V, Pandey R, Agarwal V. Experimental exploration for the performance improvement of a thrust ball bearing using circumferential micro-grooved races[J]. Surface Topography: Metrology and Properties, 2021, 9(3): 035017.

[58] Baharin S, Ghazali M, Wahab J. Laser surface texturing and its contribution to friction and wear reduction: a brief review[J]. Industrial Lubrication and Tribology, 2016, 68(1): 57-66.

[59] Kovalchenko A, Ajayi O, Erdemir A, et al. The effect of laser surface texturing on transitions in lubrication regimes during unidirectional sliding contact[J]. Tribology International, 2005, 38(3): 219-225.

[60] Laki G, Nagy A, Rohde-Brandenburger J, et al. A Review on Friction Reduction by Laser Textured Surfaces in Internal Combustion Engines[J]. Tribology Online, 2022, 17(4): 318-334.

[61] Li X, Guo Z, Huang Q, et al. Application of Bionic Tribology in Water-Lubricated Bearing: A Review[J]. Journal of Bionic Engineering, 2022, 19(4): 902-934.

[62] Olofsson U, Andersson S, Björklund S. Simulation of mild wear in boundary lubricated spherical roller thrust bearings[J]. Wear, 2000, 241(2): 180-185.

[63] Olofsson U. Fatigue life reduction due to wear in boundary lubricated spherical roller thrust bearings[J]. Wear, 1997, 207(1-2): 74-78.

[64] Shi Y, Jiang Q, Li B. Numerical Simulation of Wear Process and Reliability Lifetime For Cylindrical Roller Bearing[Z]//3rd International Conference on Computer Science and Information Technology. 2010: 238-242

[65] Bhardwaj V, Pandey R, Agarwal V. Experimental investigations for tribo-dynamic behaviours of conventional and textured races ball bearings using fresh and MoS2 blended greases[J]. Tribology International, 2017, 113: 149-168.

[66] Vidyasagar K, Pandey R, Kalyanasundaram D. An exploration of frictional and vibrational behaviors of textured deep groove ball bearing in the vicinity of requisite minimum load[J]. Friction, 2021, 9(6): 1749-1765.

[67] Hsu C, Stratmann A, Medina S, et al. Does laser surface texturing really have a negative impact on the fatigue lifetime of mechanical components?[J]. Friction, 2021, 9(6): 1766-1775.

[68] Zhao C, Long R, Zhang Y, et al. Influence of characteristic parameters on the tribological properties of vein-bionic textured cylindrical roller thrust bearings[J]. Tribology International, 2022, 175: 107861.

[69] Wang X, Adachi K, Otsuka K, et al. Optimization of the surface texture for silicon carbide sliding in water[J]. Applied Surface Science, 2006, 253(3): 1282-1286.

[70] Wang X, Kato K, Adachi K, et al. Loads carrying capacity map for the surface texture design of SiC thrust bearing sliding in water[J]. Tribology International, 2003, 36(3): 189-197.

[71] Grützmacher P, Rosenkranz A, Szurdak A, et al. From lab to application-Improved frictional performance of journal bearings induced by single-and multi-scale surface patterns[J]. Tribology International, 2018, 127: 500-508.

[72] Grützmacher P, Rosenkranz A, Szurdak A, et al. Effects of multi‐scale patterning on the run‐in behavior of steel–alumina pairings under lubricated conditions[J]. Advanced Engineering Materials, 2018, 20(1): 1700521.

[73] Qi H. Study on Dynamic Characteristics of cylindrical roller bearings with Surface texture [D]. Taiyuan: Taiyuan University of Technology,2022.