Reform of the Practical Teaching System for the Measurement and Control Technology and Instrumentation Program Oriented toward Engineering Practice Competence

Authors

  • Yong Zheng Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Banan District, Chongqing, 400054, China
  • Yan Chen School of Electrical and Electronic Engineering, Chongqing University of Technology, Banan District, Chongqing, 400054, China
  • Lingyun Xu Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Banan District, Chongqing, 400054, China
  • Tianheng Zhang Engineering Research Center of Mechanical Testing Technology and Equipment, Ministry of Education, Chongqing University of Technology, Banan District, Chongqing, 400054, China

DOI:

https://doi.org/10.54097/8mq0h948

Keywords:

Measurement and Control Technology and Instrumentation, Practical Teaching, Engineering Practice Competence, Project-Driven Learning, Continuous Improvement

Abstract

To address the problems in the practical teaching of the Measurement and Control Technology and Instrumentation program, including insufficient articulation among courses, inadequate transition from verification experiments to comprehensive design, limited integration of engineering contexts, insufficient depth of students' autonomous practice, and an overemphasis on outcome-based assessment, this study, guided by outcome-based education and engineering education accreditation requirements, takes the development of engineering practice competence as the main thread and constructs a four-level progressive and project-integrated practical teaching system consisting of “Basic Training-Professional Integration-Engineering Application-Innovation Enhancement”. Students’ practical competence is divided into four progressive levels: basic practical competence, professional comprehensive competence, engineering system competence, and innovative practice competence. Project-driven tasks are used to connect course experiments, course design projects, comprehensive professional practice, enterprise internships, and graduation projects, while a multidimensional assessment and continuous improvement mechanism combining process evidence with outcome assessment is established. The proposed system emphasizes the coordinated progression of task complexity and student autonomy and provides an operable teaching framework for promoting the transformation of practical teaching from isolated skill training to the cultivation of system-level engineering competence.

Downloads

Download data is not yet available.

References

[1] Ministry of Education, Ministry of Industry and Information Technology, & Chinese Academy of Engineering. (2018, October 8). Opinions on accelerating the construction and development of emerging engineering education and implementing the Outstanding Engineer Education and Training Program 2.0.

[2] China Engineering Education Accreditation Association. (2024). Engineering education accreditation standard (2024 version). China Engineering Education Accreditation Association.

[3] Wei, X. Y., Li, D., Cheng, Z. M., & Qian, M. Y. (2025). Teaching reform of sensor and detection technology course driven by artificial intelligence. Journal of Anhui University of Technology (Social Sciences), 42(4), 56-58.

https://doi.org/10.3969/j.issn.1671-9247.2025.04.015

[4] Jin, S. B., Ye, G. Y., & Liu, X. L. (2025). Teaching reform and exploration of modern instrument design under the background of emerging engineering education and industry-education integration. Heilongjiang Education (Theory & Practice), (6), 71-74.

[5] Li, X. L., Ge, Q., & Hu, C. H. (2025). Teaching reform of signals and systems under the background of emerging engineering education. Heilongjiang Education (Theory & Practice), (2), 61-64.

[6] Du, P., Zhao, M., Zeng, W., et al. (2025). Research on project-based engineering practical teaching mode of flywheel energy storage system. Experiment Science and Technology, 23(5), 106-110, 117. https://doi.org/10.12179/1672-4550.20240460.

[7] Shi, Y., Wei, Y. G., & Wang, Z. X. (2025). Teaching reform of mechatronics course driven by virtual 3D printer project. Experiment Science and Technology, 23(5), 80-85.

https://doi.org/10.12179/1672-4550.20240260

[8] Zhang, Y., Wang, C. H., & Fan, S. (2025). Construction and research on integrated teaching mode of graduation practice and graduation project under the background of engineering education professional accreditation. Heilongjiang Education (Higher Education Research & Evaluation), (3), 55-57.

[9] Kong, F. D., Zhang, Z. H., Li, Y., et al. (2025). Exploration and practice of OBE teaching model for engineering drawing course under the background of engineering education professional accreditation. Agricultural Machinery Use and Maintenance, (6), 153-157.

https://doi.org/10.14031/j.cnki.njwx.2025.06.037

[10] Zhao, D. Z., Ma, J. F., & Cui, L. L. (2025). Multi-dimensional teaching reform and curriculum ideological and political construction of "Sensing and Testing Technology". Education and Teaching Forum, (27), 53-56.

https://doi.org/10.20263/j.cnki.jyjxlt.2025.27.012

[11] Chen, C. H., Cui, Y. X., Wang, Y. N., et al. (2025). Reform and practice of modern instrumental analysis experiment course under the background of emerging engineering education. Laboratory Science, 28(1), 212-215.

[12] Li, Y., Ding, F., Wang, J., et al. (2026). Application of Raman spectrometer construction in instrumental analysis experimental teaching. University Chemistry, (3), 373-382.

[13] Xu, K., Zhen, C., Ban, R., et al. (2026). Project-based reconstruction and practical exploration: Teaching innovation of Instrumental Analysis under the "three-stage progression and four-dimensional linkage" model. Guizhou Education, 47(4), 73-76.

Downloads

Published

28-09-2026

Issue

Section

Articles

How to Cite

Zheng, Y., Chen, Y., Xu, L., & Zhang, T. (2026). Reform of the Practical Teaching System for the Measurement and Control Technology and Instrumentation Program Oriented toward Engineering Practice Competence. Journal of Education and Educational Research, 21(1), 77-84. https://doi.org/10.54097/8mq0h948